Draganfly Innovations Inc
2108 St. George Avenue
Saskatoon, SK S7M0K7
Canada
Toll Free: 1-800-979-9794
Phone: 1-306-955-9907
Business Hours: (CST)
Mon-Fri: 7:30 am - 5:00 pm
It is now:
8:32 am CST
Draganfly Innovations Inc. Help Center
Knowledgebase
BladeRunner bottom rotor does not spin
Article ID:
000006
Rating:
3.9 / 5.0 (9 votes)
Views:
1496
Your rotor shaft is loose and the gears are not meshing together
You can check to see if your main rotor shaft is loose by firmly grasping the helicopter on the top and bottom of the canopy and moving the rotor shaft up and down. There should be at the most 1/16th of an inch of movement of the rotor shaft. If there is no play the rotor shaft, it will not spin freely. You can tighten up the rotor shaft by gently pushing down on the top of the main gears inside of the canopy while supporting the base of the rotor shaft on the corner of a table. If you tighten up the rotor shaft too much, and it does not spin freely, you can loosen it up by pushing down on the bottom of the helicopter (when it is upside down) while supporting the rotor shaft on a solid surface.
