|
Installation of the rotors onto the Bladerunner, Micro Mosquito, and Firefly helicopters is quite easy. (Hint, Keep all small items in a bowl or jar to stop them from disappearing from you) 1. Remove the semi transparent stopper from the top of the rotor shaft. 2. The top rotor, the 2 spacers, and the bottom rotor should pull off the rotor shaft from the top. 3. Install your new bottom rotor. It will be the rotor with the longer stem at the bottom with the notch in it. It will mesh with the gear that sticks out. 4. Slide on your spacers. 5. Slide on your top rotor. There is a notch in the rotor, so make sure it lines up with the rotor shaft. 6. Put on the stopper tube, and you are ready to fly! If you have any questions, email info@rctoys.com for more information.
<< back
|
