Perfect for use in your indoor slow flyers or indoor aerobatic models, the Hacker A20-12XL brushless motor works best with 2-3 cell 7.4V-11.1V LiPoly batteries. The powerful and efficient 12 pole "Outrunner" Brushless motor design creates massive torque, which will increase performance and lifting capacity. This motor features Oversize bearings, curved Neo-magnets, and uses High-efficiency stator design. These motors produce the more power at lower current consumption than other popular Outrunner designs!

Included are: mounting hardware and 2 spare shafts. The motor has a standard 3mm output shaft.

Technical Specifications for Hacker A20-12XL

• Motor Type: Brushless, Outrunner
• Weight: 84g (2.96 oz)
• Power: 300 Watts
• RPM/Volt (KV): 1000
• Continuous Current: 20A
• Burst Current: 35A
• Recommended Use: 20-25oz Aircraft

This is a simple AC powered GWS r/c charger. The model number is SLC419648, this is the standard charger that is included in most GWS radio systems.

This simple GWS charger uses any 110 volt AC wall outlet and has 6 foot charging leads. Able to charge both NiCd and NiMH batteries. This GWS charger can charge both your transmitter and receiver batteries simultaneously.

This charger is also Futaba compatible.

GWS Wall Charger Specifications:

• Input voltage: 110 to 120 volts AC, 60 Hz
• Output power for transmitter: 9.6 volts DC, 70mA
• Output power for receiver: 4.8 volts DC, 100mA
• Connector type: Futaba "J" style on receiver and Futaba round barrel on transmitter (center pin positive)
• Charges both NiCad and NiMH
• Futaba Compatible

Replacement Transmitter Antenna for the following HiTec Radios:

• Optic 6
• Eclipse
• Laser
• Prism

INCLUDES: One Transmitter Antenna Female threaded inside antenna base

Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications.

• Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
• Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
• Opto isolated throttle cable helps reduce radio interference
• Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!

• Length: 2.6"(66mm)
• Width: 1.3"(33mm)
• Height: 0.8" (20.6mm)
• Weith: 2oz(56.7g)
• Max Amps - ESCs: 80 amps
• Max Volts: 50V , 12s LiPo, 36 cells NiCad/NiMh

Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications.

• Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
• Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
• Opto isolated throttle cable helps reduce radio interference
• Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!

• Length: 2.6"(66mm)
• Width: 1.3"(33mm)
• Height: 0.8" (20.6mm)
• Weith: 2oz(56.7g)
• Max Amps - ESCs: 60 amps
• Max Volts: 50V , 12s LiPo, 36 cells NiCad/NiMh

Phoenix Ice HV controllers offer incredible reliability and flexibility for your high powered applications.

• Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
• Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).
• Opto isolated throttle cable helps reduce radio interference
• Full data logging capabilities. Measure amp draw, controller temperature, motor rpms, battery voltage and ripple and more. Take the mystery out of electric flight!

• Length: 1.6"(40.6mm)
• Width: 1.3"(33mm)
• Height: 0.8" (20.6mm)
• Weith: 1.22oz(34.6g)
• Max Amps - ESCs: 40 amps
• Max Volts: 50V , 12s LiPo, 36 cells NiCad/NiMh

This motor features:

• Oversize bearings
• Curved Neo-magnets
• High-efficiency stator design
• 2mm Output shaft

These motors produce the more power at lower current consumption than other popular Outrunner designs!

Includes:

• Prop-saver
• Fiberglass motor mounts
• Screws

Technical Specifications for Hacker A10-13L

• Motor Type: Brushless, Outrunner
• Weight: 20g (0.70 oz)
• Power: 75 Watts
• RPM/Volt (KV): 1700
• Continuous Current: 5A
• Burst Current: 8A
• Recommended Propeller: APC 8x4.3
• Recommended Lithium Polymer Battery: 3 cell, 350mAh to 800mAh, (TP-350-3SPL2, TP-480-3SPL2)

This Main Gear Set for the EVO Flight Mini Stinger Helicopter is a factory replacement part. If your main gear breaks, this will restore your Mini Stinger to new condition.

Specifications:

• Material: plastic
• Quantity: 2

This Inner Shaft for the EVO Flight Mini Stinger Helicopter is a factory replacement part. If your inner shaft breaks, this will restore your Mini Stinger to new condition.

Specifications:

• Material: metal/plastic
• Quantity: 1

These body retianers for the EVO Flight Mini Stinger Helicopter are factory replacement parts. If you lose your body retainers, this will restore your Mini Stinger to new condition.

Specifications:

• Complete Set of Body Retainers

This screw set for the EVO Flight Mini Stinger Helicopter are factory replacement parts. If you lose your screws, this will restore your Mini Stinger to new condition.

Specifications:

• Screw Set

This receiver/servo set for the EVO Flight Mini Stinger Helicopter are factory replacement parts. If your receiver/servos break, this will restore your Mini Stinger to new condition.

Specifications:

• Receviver and Servo

This set of two motors for the EVO Flight Mini Stinger Helicopter are factory replacement parts. If your motor breaks, this will restore your Mini Stinger to new condition.

Specifications:

• Electric Motors

This Battery for the EVO Flight Mini Stinger Helicopter is a factory replacement part. If your battery breaks, this will restore your Mini Stinger to new condition.

Specifications:

• 1 Cell 3.7v
• 110 mAh
• Li-Po

These Rotor Blades for the EVO Flight Mini Stinger Helicopter are factory replacement parts. If your rotors break, this will restore your Mini Stinger to new condition.

Specifications:

• Material: plastic
• Quantity: 1