Futaba S3004 Standard Analog Ball Bearing RC Servo SKU: FUT-3004

Product Description:

The Futaba S3004 is a Light Weight, Analog, Standard, Ball Bearing RC Servo. This Futaba S3004 RC servo is used in RC airplanes, RC cars, RC boats, or where standard servos are used. This is a replacement for Futaba S15 servos.

The Futaba S3004 servo can produce high-current draw from your batteries so make sure your receiver pack is capable of delivering sufficient Amps.

Futaba S3004 RC Servo Features:

• Single ball bearing on output shaft
• Precise tight fit throughout the geartrain
• Being standard size and light weight, it fits many applications

Futaba S3004 RC Servo Includes:

• 1 round servo horn

Futaba S3004 RC Servo Specifications:

• Control System: +Pulse Width Control 1520usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.23sec/60 degrees at no load
• Operating / Maximum Speed (6.0V): 0.19sec/60 degrees at no load
• Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
• Stall / Maximum Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
• Current Drain (4.8V): 7.2mA/idle
• Current Drain (6.0V): 8mA/idle
• Motor Type: 3 Pole Ferrite
• Potentiometer Drive: Indirect Drive
• Bearing Type: Single Ball Bearing
• Gear Type: All Nylon Gears
• Connector Wire Length: 12"
• Connector: "J" type with approx. 5" wire
• Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
• Weight: 1.3oz. (37.2g)

Get More Info: View the Technical Information for Futaba S3004 Standard Analog Ball Bearing RC Servo.

Best Shipping Price: