Two Sets Of BladeRunner Helicopter Replacement Rotors SKU: K-BR-ROTORSET-2

Product Description:

This is a kit of two replacement rotor sets (two upper rotors and two lower rotors total) for the Blade Runner RC indoor helicopter made by Interactive Toy Concepts. It is good to keep a spare set of rotors on hand for your Blade Runner as a backup so you can keep flying, even after a crash.

These rotors will fit the BladeRunner RC helicopter, BladeRunner II R/C helicopter, and the new red Spiderman RC BladeRunner helicopter, but not the Search and Rescue indoor RC helicopter, Firefly R/C helicopter, or Micro Mosquito RC helicopter.

How to Replace Your Bladerunner Rotor Blades:

1. The rotor blades are held in place by a short rubber tube at the very top of the main drive shaft of the BladeRunner. Remove this tube and the Blade Runner rotors will then slide off along with the two plastic spacers that keep the rotors separated
2. When replacing the rotor blades, first slide on the lower rotor (the one with two notches in the bottom of the stem)
3. Slide on the two spacers
4. Slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order for it to slide into place. This should not require much force when the parts are correctly oriented
5. Lastly, slide on the transparent capping tube

Note: Not compatible with Bladerunner Search and Rescue, Firefly, or Micro Mosquito RC Helicopters.

Get More Info: View the Technical Information for Two Sets Of BladeRunner Helicopter Replacement Rotors.

Best Shipping Price: