Note: Due to the size, only of one of these can be shipped per order. Only ground shipping is available within North America. The airframe is packaged fully assembled, the box is 36.5" x 33" x 10".
The SX3 RC airplane can fly 3D aerobatics indoors and outdoors. This SX3 EPP foam RC airplane ships
completely assembled. The wing is mounted, servos are installed,
control surfaces are hinged, and the linkages are complete.
First, install the receiver, ESC, motor, and battery, then
go flying! Includes 3 pre-installed 6 gram servos. Our Pre-Built SX3's are made of the
highest quality EPP foam, it is considerably lighter and
more resistant to tearing than other EPP foams. You will
feel the difference.
The SX3 rc airplane design is highly refined, it utilizes fiber tape where testing has shown it is
needed; flat carbon fiber in the ailerons, horizontal
stabilizer, elevator, and rudder; and a clear
tape-sheeted fuselage crossmember.
Internal access is a breeze, the bottom of the fuselage is held
together with high-quality Velcro from the rear of the
wing through to the front of the fuselage. This allows
unrestricted access to the motor, receiver, and ESC.
The top of the fuselage has a 5" length of Velcro to
allow access to the aileron servo and. For long life,
the fuselage is held together with extra tape where the
The SX3 is designed to fly
beautifully, it is stable in forward flight, and
doesn't all-too-readily fall into steep alpha flight
like most flat foam airplanes. Extreme fuselage side
and rudder area make the SX3 very comfortable in knife
SX3 RC Airplane Specifications:
- Wingspan: 32.5" (82.5cm)
- Length: 35" (89cm)
- Wing area: 250 in^2 (16.5 dm^2)
- Weight: 8oz (226g)
- High quality EPP Foam Construction
- Nearly Indestructible
- White (no decals)
The SX3 RC airplane does NOT include decals; the plane is constructed of white EPP foam.
- 3 pre-installed 6 gram servos
- Brushless motor under 2oz.
- 7-25A Brushless motor speed controller (ESC)
- 2 or 3 cell lithium battery
- 4 channel Receiver under 15g
Note:The SX3 is plain white with no decals.
Get More Info: View the Technical Information for SX3 Pre-Built EPP Aerobatic 3D RC Airplane Incl 3 Installed Servos.