Information Articles &Other RC Parts & Components &Press Releases December 15, 2010
The eLogger V4! A Better Way to Monitor Your RC Power System
![]() |
![]() |
![]() |
Whether you’re into Electric Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.
Some Added Features For The NEW eLogger V4
- High speed logging at up to 50Hz (increased from 10Hz).
- Sixteen times the logging capacity of the standard eLogger V3. Typically logs all available sensors for about four hours, at 10Hz.
- Voltage logging increased to 80 volts maximum.
- The eLogger V4′s on-board voltage regulator has much improved capability. More accessories can be used at higher voltages, without requiring the battery backup harness to be used. For our OSD customers, typical configurations should never require the backup harness with the eLogger V4.
- A USB “mini” connector is built into the eLogger V4.
- All the 3-pin sensor connections are now polarized, and the connectors are now shrouded, helping protect them from physical damage or short circuits.
- Includes Y cable for throttle logging, which also provides battery backup if needed.
The eLogger system comes with everything you need to log, analyse, and graph mAH, Current, Wattage, Voltage and throttle position, right out of the box. And, your eLogger is tremendously expandable, by adding additional sensors (shown below).

Why should I choose the Eagle Tree eLogger?
Some ESC manufacturers are adding data logging to their products. However, these logging capabilities are limited, have very short logging times at high sample rates, and few if any additional sensors are available. While these built-in solutions may “whet your appetite” for data, our eLogger and its incredible array of sensors and powerful software will let you measure virtually anything you will ever need.
Also, investing in logging add-ons that are tied to a particular ESC means that the investment is only good as long as you use that ESC. Eagle Tree telemetry is portable across any ESC brand/model.
Finally, while the ESC manufacturers and others may lose interest in their logging capabilities if they don’t sell well, you can rest assured that Eagle Tree will continue to enhance and expand our eLogger with additional features and sensors. Data is all we do!
——
Do you need any RC parts to go with your eLogger? We carry a huge selection available for purchase online or over the phone.
——
© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
Chargers & LiPo Balancers &Lithium Polymer Batteries &Press Releases December 3, 2010
Thunder Power LiPo Batteries, New Charging Capabilities And Ultra-Micro Models
![]() |
Need more power for your miniature RC? Thunder Power has just released two new ultra-micro, high efficiency, one cell LiPo batteries.
For use with your new batteries, Thunder Power is making portability and charging easy with their new one cell LiPo wall charger. |
Ultra-Micro LiPo Batteries

Thunder Power RC introduces all-new 1S 3.7V 125mAh and 160mAh G4 Pro Lite 25C series ultra-micro LiPo batteries delivering more capacity and power at the lowest possible weight, up to 5-times more cycle life and 5C charge rate capability with no loss in power or cycle life delivery. Plus they can be matched with the all-new TP103CQ Quad Port pocket-sized charger for hours of non-stop flying fun.
Pocket-Sized Charging Power and Convenience for Ultra-Micro Batteries
The TP103CQ-ACDC combo is the ideal, pocket-sized charger and power supply setup to charge the 1S 3.7V LiPo batteries typically used to power ultra-micro and similar class airplanes, helicopters and other models. The TP103CQ quad (4) port charger can be easily and conveniently powered from a 100-240V outlet using the included TP1201P AC to 12V DC, 1-amp power supply while the included DC input power leads can be connected to almost any 11-15V DC power source including a 12V Pb (lead-acid/gel cell) battery for charging on the go. The charger features four ports that operate independently and allow you to charge one or up to four batteries simultaneously at a rate of 0.3A per port. Other great features include advanced multi-color LED indicators for each port that signal red when in charge mode and green when charging is complete for the simplest possible operation. The TP103CQ is compatible with Thunder Power RC ultra-micro class batteries (sold separately) in addition to most other similar class batteries available from Blade®, E-flite®, Force RC™, HobbyZone®, ParkZone® and others. And for those that may not need the AC power supply, the TP103CQ is also available separately as the charger with DC input power leads only.
——
Do you need chargers, balancers, connectors and other accessories for your lithium polymer rechargeable RC batteries? We carry a huge selection available for purchase online or over the phone.
——
© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com




