10 Power Tips For Flying / Repairing The Blade MCX RC Helicopter

The Blade MCX is an ideal RC helicopter for beginners. Here’s a list of 10 power tips to help you keep your Blade MCX in the air, and have fun flying it.

1. Keep A Few Replacement Parts Handy – Accidents happen, and waiting for replacement parts to come in the mail can be a pain. When you order a Blade MCX, also order a few of the most needed replacement parts. These include the main landing gear, stabilizer fly bar, upper main rotor blades, and inner shaft. We’ll post a detailed how to for adding replacement parts to the Blade MCX shortly.
2. Trim the Heli For Easier Flight – The Blade MCX transmitter has trim tabs that you can use to cancel out unwanted movement in flight. Apply trim by bringing the helicopter to a stationary hover, and letting go of the control sticks for a moment. Note the direction that the RC helicopter drifts in, and  press the buttons near the transmitter sticks in the opposite direction to compensate. Each trim tab corresponds to the control stick it’s placed next to. Page 15 of the manual has detailed instructions for trimming the Blade MCX.
3. Land Before LVC (Low Voltage Cut-off) – At low voltage cut-off, the RC helicopter’s red LED lights will start to blink. This means that the lipo battery is at a minimum voltage, and can’t be drained further without damage. Land immediately. Flying past LVC will damage the battery, and you’ll get shorter flight times as a result.
4. How To Fly Faster – Flying forwards using only the pitch control doesn’t make the Blade MCX go very fast. You can increase speed by increasing throttle as you pitch forward, and by flying in a gradual left or right turn.
5. Lubricate Moving Parts – If you have trouble controlling the Blade MCX, it could be because parts are not moving freely enough. Use a small amount of light lubricate on the moving parts near the rotor head to allow them to move more smoothly.
6. Replace the AA Batteries Included With The Blade MCX – The AA batteries included in the box aren’t as good as those you can get locally. They work fine in the transmitter, but they won’t charge the Blade MCX battery nearly fast enough.
7. Keep A Spare Battery Charged When Flying – Why interrupt flying to let the battery charge? If you have a spare battery for the Blade MCX, you can charge one while you use the other, reducing down time for charging.
8. Keep the Main Shaft Clean – Foreign objects, especially hair can get stuck in the Blade MCX main shaft. This will make the motors struggle, and could stop them completely. Check for hair or other objects wound around the main shaft before flying and remove any you find with a pair of tweezers.
9. Use Rechargeable Batteries in The Charger – Using rechargeable batteries in the Blade MCX battery charger will save you money.
10. Close Doors And Turn Off Fans – Closing doors and turning off fans in the flying area will reduce drafts and make flying easier. The Blade MCX was not designed to handle any wind.

© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
RSS: www.rctoys.com/pr/feed