Two Sets of Main Rotors for the BladeRunner RC Helicopters

The K-BR-ROTORSET-2 is a kit with two main rotor sets for the Bladerunner RC helicopters

This set includes four main rotors, two upper and two lower. This means that you can completely replace both rotors two times. We recommend that you get a set of main rotors when first learning to fly your RC helicopter so that you will have some replacements handy in case of a crash.

The Bladerunner replacement rotors are constructed out of durable plastic and carbon fiber to minimize damage in the event of a crash. If they do become damaged, it is generally better to replace them than to attempt a repair, but it still helps to know some basic repair tips:

• If the rotors are chipped, you can probably fix them by placing some clear tape over the chipped part. This can lead to an imbalance, so repeat this for the opposite side of the same rotor.
• A broken carbon fiber ring can sometimes be repaired with a small amount of strong glue.
• If a rotor blade is broken at the root, replacement of the damaged main rotor is the only option.

The Bladerunner replacement rotor set will fit the following RC helicopters:

• Bladerunner (original)
• Bladerunner II
• Spiderman

They will not fit the Search and Rescue version of the Bladerunner, the Firefly, or the Micro Mosquito.

Replace your Bladerunner helicopters rotor blades by following this procedure:

1. Remove the transparent tube found on top of the upper rotors (be careful not to lose it!).
2. Slide off the top rotors and the two plastic spacer tubes.
3. Slide off the bottom rotors.
4. Replace the bottom rotor and plastic spacers.
5. Align the upper rotor and push it on.
6. Push on the transparent tube that you removed in step 1.

Use the set of two main rotors to replace the main rotors on your bladerunner RC helicopter if they break, and to keep a stock of extras in case of crashes.

——
© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
RSS: www.rctoys.com/pr/feed