The Deans Ultra Plug Connector Pair

The Deans Ultra Plug connector pair is a pair of industry standard electrical connectors for your RC vehicles. These solder on connectors are ideal for use with batteries which do not come with connectors, or the other electrical system components of RC vehicles.

The Deans Ultra Connectors have a very low internal resistance as compared to their competitors (see this post on RCGroups.com). Experiments have shown this internal resistance to be only 91 micro ohms, as compared with 360 micro ohms for a generic brand.

Soldering the Deans Ultra Connector Pair to a battery is easy. Just follow these simple steps:

1. Strip one wire from the battery. It is very important that only one wire is exposed at a time or you might risk a short circuit.
2. Tin the exposed wire. First apply a small amount of soldering flux then heat the wire with your soldering iron. Let a small amount of solder flow through the strands of wire. You may need to file down the tinned wire after this step so that it will fit in the female connector.
3. Tin the connector in the same way.
4. Slide the included piece of heat shrink tubing over the wire you have just prepared.
5. Solder the connector and wire together.
6. Using a small butane lighter, shrink the heat shrink tubing over the finished connection.
7. Repeat these steps for the other wire.

Use the Deans Ultra Plug Connector pair to connect the different electrical components of your RC model. You can order them in packs of two and four on our website.

——
© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
RSS: www.rctoys.com/pr/feed