Introducing the New Sport BEC - Power All Your RC Model Radio Systems

The Sport BEC is a high capacity switch mode BEC (battery eliminator circuit) for RC models.

One of the main features of the Sport BEC is that it can provide two levels of voltage to your servos. A small switch on the side of the Sport BEC lets you choose either a 5 volt output, or 6 volts for greater servo responsiveness, speed, and torque. This is great for RC helicopters, which need the servos to operate as fast and crisply as possible.

The Sport BEC connects to your electric system between the ESC (electric speed controller) and the receiver, so that you don’t need to disable your ESCs BEC. Just plug the Sport BEC in and fly.

Many ESC BEC ratings are inaccurate, because the capacity of the BEC goes down as the pack voltage increases. This means that your servos might not be getting enough power if you use a high voltage battery. The Sport BEC eliminates this problem and is capable of an output voltage of 3.5 amps when using up to an 8 cell battery. This is enough current to power up to 8 standard servos or 6 digital servos.

The Sport BEC can power almost every kind of model aircraft servo, including digital, standard, and micro servos. If you are using the Sport BEC with micro servos, be sure to set the voltage to 5 volts, or consult the servo owners manual. Some micro servos can be damaged by 6 volt power.

The Sport BEC has been designed to minimize radio interference, but we recommend that you place it at least 2 inches away from the receiver and antenna.

Use the Sport BEC to power the radio system of your nitro conversion plane, robot, or other RC vehicle. It also makes a great replacement for the low current BECs built into most ESCs.

——
© Draganfly Innovations Inc.
Phone: 1-800-979-9794 / 306-955-9907
Email: info@rctoys.com
Web: www.rctoys.com
RSS: www.rctoys.com/pr/feed